ctdgsxr5
03-25-2009, 07:24 PM
mods include ...
1. full graves titanium exhaust system
2. pcIII
3. ohlins rear shock (ttx - triple adjust)
4. front forks is re-done with racetech 9.0 springs and revalved
5. ohlins/scotts steering damper
6. titan brake and clutch levers
7. galfer front and rear stainless steel brake lines
8. driven sprocket with ek chain (520 setup)
9. turn key module is removed (turn on the bike w/out keys)
10. eracings track body work (scuffed up from the lowside mentioned above)
but will come with brand new eracings body work in box
11. vortex ad. clip ons
12. safety wired ready
13. arata full adj. rearsets
14. bmc race air filter
"there might be a few things im forgetting" ...
"i will include front and rear stands along with tire warmers (temp. adjustable), alpinestar back protector, T-Pro back protector and a Coleman generator (used twice)
.................................................. .................................................. ..
(clean title) ... the bike has been through 1 very minor lowside at las vegas motor speedway (classic course) on turn 3 AWHILE back and even on the same day, the damage was so minor (cosmetic only), the clip on and levers basicly barely scuffed the ground and i continued to track on throughout the whole day and continued to track the bike till now with no issues. the bike has roughly 5500 on it and has always been serviced after every full trackday. here are some pics that i have currently on my laptop (there would be more pics when i get my other laptop back which has more pics on it) so these are the only pics i have for now ...
http://img.photobucket.com/albums/v711/05gsr/r6forsalepics1a.jpg
http://img.photobucket.com/albums/v711/05gsr/r6forsalepics6.jpg
http://img.photobucket.com/albums/v711/05gsr/r6forsalepics7.jpg
everything for 6500 obo
1. full graves titanium exhaust system
2. pcIII
3. ohlins rear shock (ttx - triple adjust)
4. front forks is re-done with racetech 9.0 springs and revalved
5. ohlins/scotts steering damper
6. titan brake and clutch levers
7. galfer front and rear stainless steel brake lines
8. driven sprocket with ek chain (520 setup)
9. turn key module is removed (turn on the bike w/out keys)
10. eracings track body work (scuffed up from the lowside mentioned above)
but will come with brand new eracings body work in box
11. vortex ad. clip ons
12. safety wired ready
13. arata full adj. rearsets
14. bmc race air filter
"there might be a few things im forgetting" ...
"i will include front and rear stands along with tire warmers (temp. adjustable), alpinestar back protector, T-Pro back protector and a Coleman generator (used twice)
.................................................. .................................................. ..
(clean title) ... the bike has been through 1 very minor lowside at las vegas motor speedway (classic course) on turn 3 AWHILE back and even on the same day, the damage was so minor (cosmetic only), the clip on and levers basicly barely scuffed the ground and i continued to track on throughout the whole day and continued to track the bike till now with no issues. the bike has roughly 5500 on it and has always been serviced after every full trackday. here are some pics that i have currently on my laptop (there would be more pics when i get my other laptop back which has more pics on it) so these are the only pics i have for now ...
http://img.photobucket.com/albums/v711/05gsr/r6forsalepics1a.jpg
http://img.photobucket.com/albums/v711/05gsr/r6forsalepics6.jpg
http://img.photobucket.com/albums/v711/05gsr/r6forsalepics7.jpg
everything for 6500 obo