wtb: 08 GSXR Front Fender & Front Brake Caliper Bolts

[rocklax]

I need a fender. Rash is fine, cracks are not.

I also need all of the front brake caliper bolts and 1 spacer.

'08 GSXR 600

Thanks.

[rocklax]

bumpidity bumpidity...

[goggles600rr]

The OEM bolts are like $12 each !Just so U know ,you can buy the caliper bolts at brafasco,or home depot 12mm by 60mm long.
Hop this helps!

[rocklax]

Thanks, now I just need to find 1 lonely spacer and a fender. I wish they sold those at Home Depot too!

[tampamax]

FYI......a zx10r bolt is the same thing and sells for 2.22 each. I think the zx6r bolts are the same as well. The part number is 92153-0577





BTW, will a front fender from a 2003 gsxr 1000 work for your application? Got one you can have for cheap if the mounting points remain the same between the forks/fenders.

[rocklax]

The OEM bolts are like $12 each !Just so U know ,you can buy the caliper bolts at brafasco,or home depot 12mm by 60mm long.
Hop this helps!

So the bolts are def NOT 12mm by 60mm, I bought them and they didn't even come close to fitting. They may be more like an 8mm.

[tampamax]

The bolts are size 10m by 60mm length.

[Coke in can]

What pitch are they? 1.5?

[tampamax]

I think they are fine thread=1.25 however i'm not 100% sure cause i don't have one in my hand at the moment. Should be easy enough to figure out by looking on the microfiche(www.ronayers.com) or taking a bolt down to your local hardware store as most carry a fitment chart/board.


Here in the U.S. the sizes break down as such.......

1.00=super fine thread
1.25=fine thread
1.50=course thread

[PopRoxMimo3]

I have a k8 600 black front fender and k9 600 white front fender.
PM SENT.

[PopRoxMimo3]

I have a k8 600 black front fender and k9 600 white front fender.