WTB front wheel/rotors for 2008 CBR1000RR

[Jet City Racer]

I need a front wheel with or without rotors and the instrument cluster/bank angle sensor wiring harness for a 2008 CBR1000RR.

Unfortunately, the wheel is year specific. 2007 won't fit.

Also looking for 2006 through 2008 320mm front rotors for the same bike.

Thanks

[cbr1krider]

04-07 wheels will fit, all you need to do is make a spacer for the right side as you are setting on the bike. I have 07 carazzerias on one of my 08s and 06 wheels on my drag 08 1000rr.

[Jet City Racer]

04-07 wheels will fit, all you need to do is make a spacer for the right side as you are setting on the bike. I have 07 carazzerias on one of my 08s and 06 wheels on my drag 08 1000rr.

I thought the rotors were spaced differently too? If you have an extra spacer or specs on exactly what I need to do, that would be great :up:

[cbr1krider]

I dont really have any specs on a spacer you can just add washers till you get it. All you need to do is put your wheel on and check to see how far your rotor is off to match the center of the brake caliper. Then add washers to the left side of the axle (as you are looking at the front of the bike) to compensate. This will in turn make the calpers and rotors match.

[Jet City Racer]

Thanks, I'll give it a shot. :beer: