PDA

View Full Version : 2007 CBR 600rr fully built must sell!!


doc c
01-13-2009, 12:14 AM
This is a fully built 2007 CBR 600rr. This was to be my race bikes back up.
Never raced, only sat on the trailer.

Ohlins shock in the rear $1,200
Full galfer superbike wave rotors $800
galfer ceramic pads front and rear
Stainless Galfer brake lines
Full titanium ARATA exhaust $1,600
Gilles titanium rearsets $540
Pirelli Diablo Coras 2's $500
Bike also have a Yoyodyne slipper clutch installed. $800
There is over $400 worth of titanium bolts and fastners on the bike as well.

selling due to new home purchase

I have alot of other add on parts too much to list. Bike has less than 1,000 miles on it!!

Call me to schedule a showing. Located in sterling, IL 61081

http://i144.photobucket.com/albums/r181/cp3823/cbr%20600rr%202007/birthday08086.jpg

http://i144.photobucket.com/albums/r181/cp3823/cbr%20600rr%202007/birthday08092.jpg

http://i144.photobucket.com/albums/r181/cp3823/cbr%20600rr%202007/birthday08094.jpg

http://i144.photobucket.com/albums/r181/cp3823/cbr%20600rr%202007/Galena2008025.jpg
http://i144.photobucket.com/albums/r181/cp3823/cbr%20600rr%202007/DSC01398.jpg

http://i144.photobucket.com/albums/r181/cp3823/cbr%20600rr%202007/yoyodyneslipper.jpg

selztoad
01-13-2009, 12:38 AM
you selling it to buy a seat in the senate? just kidding nice bike

bEeR
01-13-2009, 12:43 AM
+1 on the nice bike

doc c
01-13-2009, 12:57 AM
$8000 and I'm willing to seperate and or remove items.

tons of titanium bolts, PAIR block off plates, yoyodyne slipper clutch, intagrated taillight for when I thought I might drive it on the street, 15-45 drivin sprockets and DID xso 520 chain, wave rotor on the rear of the bike, gilles chain adjusters and lifters, R&G fork sliders, bar ends and vortex frame sliders, Gilles titanium VCR rearsets, ohlins shock that was setup by Dan Kyle racing for a 175-185 pound rider, motul fork oil in the front stock forks, BMC race airfilter, pirelli diablo corsa tires with only 300 miles, ARATA full titanium exhaust with about 4 hours of run time. The pipe are barely turning blue.

I have most of the stock parts as well. Stock bike would sell for $6800-$7,200 on ebay or craiglist, I'm asking $8000 for the over $4,500 of add on parts.

doc c
01-13-2009, 01:21 AM
I'm also willing to sell the aftermarket parts. PM me what you want.

Lil' Red
01-13-2009, 02:15 AM
Doc C is a good guy I have actually bought something from him from another site. A++ for me

doc c
01-13-2009, 02:23 AM
thanks bro. I hate to sell it, but the purchase of a new home and a new 1098 duc, somthing has to go.

Lil' Red
01-13-2009, 05:50 AM
One thing, do the chicken strips come free or are those extra?









Sorry I had to say it :)

doc c
01-13-2009, 10:15 AM
One thing, do the chicken strips come free or are those extra?




they def come with the bike :-)

bassguytom
01-13-2009, 12:14 PM
Does the bike have the street fairings on it? I see mirrors and I think I see a headlight, but with the angle of the pics, I can't tell for sure. (I'm actually looking for a track set-up street-legal bike, so this is what I'm looking for).

Nice bike

doc c
01-13-2009, 04:21 PM
all PM's returned.

doc c
01-13-2009, 10:13 PM
bump

cbrmat
01-17-2009, 12:47 PM
Doc, are you still firm on the price..... ?

I'm not that far away from you in OH.

Thank you,

-Matt

DnR4everus
01-17-2009, 01:25 PM
Nice looking bike. WOW!

doc c
01-17-2009, 01:47 PM
Yes, firm on the price. I may have a buyer

Cajun Kid
01-19-2009, 10:35 AM
Are you willing to split the drive if a deal was made?

NickyZ
01-19-2009, 04:50 PM
PM me with your price for the shock and slipper separate please

cbrmat
01-20-2009, 03:54 PM
This is a sweet ride, I'd really be interested if the price dropped a bit.

graffiti600RR
01-20-2009, 05:21 PM
are those shorty pazzo's??? if so would you be willing to part those out serepately? pm me please

doc c
01-20-2009, 07:05 PM
The price is not dropping. YOU will not find a better deal anywhere

doc c
01-20-2009, 07:14 PM
BTW, if there are some parts on the bike anyone is interested in, PM me.

doc c
01-20-2009, 11:48 PM
bump.

BearcatRR
01-21-2009, 02:59 PM
Is that Glen's old bike? I would be very interested if I wasn't a broke ass.

doc c
01-21-2009, 05:24 PM
BUMP

doc c
01-21-2009, 08:55 PM
bump.... The new Ducati needs some performance goodies.

goggles600rr
01-21-2009, 08:58 PM
I agree I have delt with Doc on a different forum and he is a standup guy!
Good luck with the sale BRO!!!

doc c
01-22-2009, 01:02 AM
Thanks bro. :-)

56cbr600rr
01-22-2009, 01:33 AM
Someone needs to buy this at this price. If you think its to pricey (it isn't), buy it and sell off some of the pieces to get the price point you want. You'll come out ahead- gauranteed!

doc c
01-22-2009, 12:26 PM
thanks! BUMP

doc c
01-22-2009, 05:55 PM
DO we have any intrest in the race parts? PM me

doc c
01-23-2009, 11:35 PM
The ARATA exhaust from the bike is sold. BUMP>

doc c
01-24-2009, 03:12 PM
BUMP for the remaining race parts on the bike.

doc c
01-25-2009, 02:15 AM
The arata and slipper is sold. If anyone is interested, PM me.

lkabong
02-20-2009, 12:21 AM
Bike still for sale?

doc c
02-20-2009, 08:09 PM
in bone stock form yes. $7,000 and I will include the flush mount turn signals.