Jonny Rocket
07-29-2008, 12:23 PM
http://i2.photobucket.com/albums/y5/JonDixon/_01N2003.jpg
Up for sale is my 2007 Ninja 650R race bike. This would be a great MotoST race bike. It is in great condition, has a clean title, and has not been crashed. The bike comes with the mods listed, as well as the stock front end and rims (to run stock classes). The bike has 2517 miles on it and runs awesome!
Penske 3-way rear shock (I have a 1000 and a 1100 pound spring)
’05 Pre-production ZX-6R front end (I have the stock front end as well)
Ohlins internals in the forks (1.0 springs)
Arata full Ti exhaust
Arata rearsets
Dynojet PCIII USB (Mapped for VP C12)
Dynojet Quickshifter
Catalyst Composites race glass
Vortex clip-ons
Spool sliders
44, 45, and 46 tooth rear sprockets
Galfer brake lines
Galfer HH brake pads
ZX-6R front brake master cylinder
Carrozzeria 3.5 x 17 front and 5.5 x 17 rear forged aluminum rims
Puig double bubble windscreen
Fully safety wired and ready to pass tech inspection
Spare parts:
Stock front end
Stock rotors
Stock front and rear rims
Clip-on bars
You can call me at 860-986-3469 for more details or for more pictures.
Up for sale is my 2007 Ninja 650R race bike. This would be a great MotoST race bike. It is in great condition, has a clean title, and has not been crashed. The bike comes with the mods listed, as well as the stock front end and rims (to run stock classes). The bike has 2517 miles on it and runs awesome!
Penske 3-way rear shock (I have a 1000 and a 1100 pound spring)
’05 Pre-production ZX-6R front end (I have the stock front end as well)
Ohlins internals in the forks (1.0 springs)
Arata full Ti exhaust
Arata rearsets
Dynojet PCIII USB (Mapped for VP C12)
Dynojet Quickshifter
Catalyst Composites race glass
Vortex clip-ons
Spool sliders
44, 45, and 46 tooth rear sprockets
Galfer brake lines
Galfer HH brake pads
ZX-6R front brake master cylinder
Carrozzeria 3.5 x 17 front and 5.5 x 17 rear forged aluminum rims
Puig double bubble windscreen
Fully safety wired and ready to pass tech inspection
Spare parts:
Stock front end
Stock rotors
Stock front and rear rims
Clip-on bars
You can call me at 860-986-3469 for more details or for more pictures.