PDA

View Full Version : 04 zx6r complete turn key racing setup


Jugglenutz
04-07-2008, 08:15 PM
Comes with bill of sale, and proof of ownership from those who have owned the bike before me all the way back to the shop that originally built the bike.

Some stuff's come up, and I need the cash, otherwise no way would I sell this bike and all my racing stuff. Turn key race ready zx6r w/ gear/stands/more

Included in price:
*2004 kawasaki zx6r
*Fresh tranny professionally installed prior to season and engine cleaned up ($300) w/ factory pro shift kit ($220), bike shifts like a dream!
*Very powerful engine w/ power commander (haven't installed it yet, but have it)
*Complete suspension - CTR setup front + fox twin clicker in rear - will include 3 hour long DVD on suspension setup and instruction
*Suspension tuned and ready to go for 200lb rider
*Fresh set of BT-002's ($255) used for 3 races 1 practice, tons of life left in them.
*Framesliders
*Aftermarket rearsets and clipons
*Aftermarket exhaust - Nikko racing exhaust
*Complete set sharkskinz body work w/ fresh paint (kawi green top/lower black)
*Passed WERA tech at VIR and Nesba two weeks prior
*Fully safety wired and ready to go
*Rear spool mounts for rear stand
*520 conversion kit
*Fresh brake bleed
*Brand new EBC HH pads bought at VIR sunday ($110)
*Transponder w/ car charger/wall charger just bought ($280)
*One track day/one race weekend on bike by me

Spare stuff
*Complete 2nd set of sharkskinz (upper, lower, front wheel well, and tail)ready to mount bodywork painted kawi green (you do the math on what painted good looking set of sharkskinz will cost you :) )
*I have a 3rd sharkskinz tail section painted kawi green on top of the other 2 tail sections
*Pit bull front stand (front forks)
*Pit bull rear stand
*Lockhart Phillips universal front stand (to get to the forks if need be)
*Right case cover
*Left case cover
*Clutch lever
*Brake lever
*Other complete blown engine torn down
*Every sized washer/bolt/nut you can imagine
*EZ-up (needs new canopy though, or you can repair the one I have, small hole where mast goes through - should be easy fix)
*Bohn back protector - like new! (I think they run $189 new? But that's just from memory)
*Size 12 boots - not great to look at, but they work
*Fieldsheer suit w/ aerohump - I'm 6'3" 210lbs, and they fit just about perfectly (send them to spyder chick and she can remove the "Lever" from the back)
*Held gloves - been through 2 crashes and held up good.
*Tons of crap from other bikes I've owned that you can trash or sell on ebay

Pit Bike:
2006 zuma w/ 3400 miles on it...needs to be cleaned up and carbs cleaned and new battery, but would look good as new! Just ran it around yesterday, but it is tough to start after sitting all winter.

Lookin for a quick sale. $6600 OBO for complete racing setup and everything above.

100% ready for your next race weekend!

http://photos-621.ll.facebook.com/photos-ll-sf2p/v113/114/53/55710621/n55710621_33099999_6277.jpg

Jugglenutz
04-07-2008, 08:53 PM
Contact Info:
7042879990
jeff.lever at answerphoneofamerica.com
or pm me

Price for bike alone: $4400

Jugglenutz
04-08-2008, 10:36 AM
$6000 for complete setup
$5500 for full setup w/out riding gear (gloves,back protector,suit,boots)
$4200 for bike
Serious inquiries only please

wcaruso
04-08-2008, 01:16 PM
if i purchase the bike alone does it come with all the extras for the bike??

Jugglenutz
04-08-2008, 06:07 PM
I'll throw in the spares for the bike, but not the extra set of sharkskinz (ie the side covers/blown engine and bolts/nutz/etc & levers)

Jugglenutz
04-09-2008, 11:37 AM
I'll part out some of the extras if anyone is interested in a particular piece

pm for prices

IronGSXR35
04-09-2008, 05:25 PM
did i miss where the bike is located?

Jugglenutz
04-10-2008, 01:08 AM
Sorry,

Charlotte, NC

I'll be at summit point though in 2 weeks and can deliver the stuff there as well.

Shenanigans
04-10-2008, 01:11 AM
1 race & quit??:down: what up, foo?:Poke: :moon:

Shenanigans
04-10-2008, 01:13 AM
[QUOTE=Jugglenutz;1987818]
*Fieldsheer suit w/ aerohump - I'm 6'3" 210lbs, and they fit just about perfectly (send them to spyder chick and she can remove the "Lever" from the back)




and take that ghey sword of the back:D :Poke:

Jugglenutz
04-11-2008, 12:27 AM
Just need the $$

roberto
04-11-2008, 01:09 AM
how much for the spare set of bodywork?


will you sell that seperately?

Jugglenutz
04-11-2008, 11:51 AM
$500 for the set of painted plastics (all kawi green). Currently have white number plates, but you can get some sweet yellow plates from redbull72 here on the board to go over them if need be.

If I find that they are flawed in any way, I'll reduce the price. They are sharkskinz, and you know what a set of nonpainted sharkskinz can run, so this is a pretty good deal.

Jugglenutz
04-12-2008, 04:41 PM
bump

zxmarc
04-12-2008, 11:14 PM
can you send pics and price of leathers to
zxmarc@hotmail.com

Jugglenutz
04-14-2008, 11:51 AM
i'll try to later today zx, thanks,

Jeff

Jugglenutz
04-14-2008, 01:42 PM
$4200 for bike and all of spares including sharkskinz (worth about $800 new & painted)