PDA

View Full Version : (2) CBR 600 F2 race bikes!


powersport15
04-06-2008, 07:51 PM
Here we have two 1991 CBR600 F2's. Both are in full race trim, NOT street legal! These bikes are CCS, WERA, CRA legal.

The first bike is the "A" bike. FOX twin clicker, F3 shock linkage, F3 front end with gold emulators done by 4+6 Cycle, 1.0 kg springs, Galfer wave rotors, Vance and Hines case covers, Vortex rearsets, Vortex clip-ons, Two brothers header with ERION can, Manual camchain tensioner, F3 radiator, Autometer tach., Daytona digital temp gauge, Graves Aluminum fairing bracket, AFAM 44tooth Alum. sprocket, AFAM gold chain, Iridium Plugs, HONDA HRC Endurance Tranny(wide ratio), Hot cams, 2mm overbore. I have dyno sheets on motor for 98H.P... This bike is the fastest F2 I have ever ridden, and handles AWSOME!

The "B" bike, or rain bike has: stock motor, Alum. fairing bracket, Vortex rearsets, K+N air filter, Two Brothers header and mid pipe, Akropovic Carbon can, Manual cam chain tensioner, Iridium plugs, 168mm Preload spacer, Emulators, stock shock.

Both bikes have matching white bodywork, one is SHARKSKIN and the other is AIRTECH. Both bikes have SUPERBIKE tails.

Included is enough spares to last about five years of racing!

* Chicken hawk tire warmers

* Front and rear rims with rains mounted W/cush drive(about five laps of wet riding).

* 3 spare race tails

* 1 spare lower

* 1 spare windshield

* 2 spare seats

* 1 set F2 forks

* 1 spare radiator

* 6 rear sprockets 43, 44, 45, 46, 47, 48 tooth( all aluminum)

* 2 front sprockets 16, 15 tooth

* protech rearsets

* stock rearsets

* Yoshi can and Two Brothers can

* F3 BRAKING rotors

* 4 spare calipers

* spare wiring harness

* NEW in box Barrnet Clutch

* 5 spare clip-ons

* 7 spare levers

* 1 spare master cylinder

* spare brake bleeders

* NEW Galfer front brake pads

* Stock inner fender

* 1 spare front fender

These bikes are ready to race. The bodywork is removed due to fresh paint. This is a complete package. I will also include a set of racing one-piece leathers. $4200.00 OBO for everything.

Email or call 920-427-3727 I have pictures of the bikes and all the spares, just drop me a line and I'll get them to you!

sizmtrz
04-06-2008, 11:13 PM
location?

powersport15
04-06-2008, 11:45 PM
Sorry about that. I am located in Wisconsin. Delivery is possible.

powersport15
04-08-2008, 08:47 AM
Come on guys, these things need to go! Make me an offer!!

KMC
04-08-2008, 11:27 PM
free bump.

fyi - you may want to say hi to the guys in the vintage section. most guys who race these bikes hang out over there...

good luck

mmfoor
04-09-2008, 11:57 PM
Good luck, but you'll have more success IMO separating the two. Vintage buyers usually look for low 2k pricing on a built F2-3. Plus posted pics seems to help also.

mmfoor

Crazy444
04-10-2008, 02:31 AM
Can you send me pics to: racingonedge@yahoo.com

Thanks

powersport15
04-11-2008, 04:48 PM
SOLD!!! Thanks everyone.