SamL
03-12-2008, 11:16 PM
http://www.kneedraggers.com/r6parts/content/bin/images/thumb/20080311_4A2G0073_MKIII_Edit.jpghttp://www.kneedraggers.com/r6parts/content/bin/images/thumb/20080311_4A2G0046_MKIII_Edit.jpg
These bikes were ridden by Matt Wait to a championship in the Formula USA series in 2003, and also competed at many AMA events. These bikes set many lap records in 2003, and held them for years to come. These bikes were given to us by Yamaha, have the original Certificates of Origin, and have never been titled. The bikes are in clean condition.
The bikes and spares included can be viewed at the following link:
http://www.kneedraggers.com/r6parts/
The specs and features are as follows:
Two 2003 Yamaha R6 Motorcycles
-120HP SuperSport Motors Built and Maintained by Fat Chuck (Chuck Giachetto)
-Power Commanders
-Ti-Force Full Ti Exhaust (one bike has a stainless steel midpipe, and a brand new, never been used Ti canister)
-Shark Skinz Bodywork (mint condition set on each bike, as well as spares shown in photos. one bike shown without bodywork for illustration purposes only)
-Graves Rearsets
-Penske Triple Adjuster Rear shocks, with custom built reservoir, and Titanium Springs
-Front Forks have 25mm Cartridge Kits from Traxxion (a custom setup for that year using Kawi cartridges)
-Graves Clip On's
-CRG Adjustable Brake Lever on One Bike
-One Bike has Brembo billet Calipers w/ Brembo Master Cylinder / Remote Adjuster
-Galfer Superbike Style Brake Lines
-Ohlins Top Mount Steering Dampers
-Vortex Frame Sliders
-Graves / Woodcraft Engine Covers
-Vortex 520 Sprockets
-DID 520 ERV Chain
-Woodcraft Front and Rear Stands Included for each bike (2 sets of stands)
--------------------------------------------------------------------------
Spares and Extra Equipment Also Included:
(see photos at above URL -- everything pictured in the photos is included, EXCEPT the work table, and the generator):
* Ohlins Road and Track Forks - Recently rebuilt by Thermosman. These forks were sold as R1 Road and Track forks, which we then mounted to the R6 using a custom Attack Triple Clamp.
* Attack Performance Custom Triple Clamp (no extra offsets included)
* Brembo offset brake caliper re locators to use Brembo calipers on the R&T forks
* R1 Front Wheel w/ oversized Brembo 320 floating rotors for use on R&T forks (not shown in pictures)
* 2 Extra Shark Skinz Uppers and Lowers in decent shape
* Rotors - 4 or 5 SETS including wave rotors, brembo rotors, and galfer rotors. Most in excellent condition with little use, just need to be scotchbrited / cleaned up.
* 2 Rear Tire Baker Tire Warmers and 1 Front Tire Warmer
* Digital Control Box for Tire Warmer Temperature
* 3 Sets of Different Rearsets with spares
* Brand New set of Ti-Force stainless exhaust headers
* More OEM spares than I can list here -- see the photos to get an idea. Seems like just about every engine part imaginable, except for pistons.
* 3 additional random bike stands
* Spare Airbox (new)
* 3 Scotts Oil Filters
* Spare stock brake calipers w/ stock lines (used)
* 2 Stock Fairing Brackets
* Spare Vortex Fairing Bracket (new)
* Spare plastic side covers (new, qty 3)
* Spare clutch basket (new?)
* Spare stock undertail (new)
* Spare Radiator (used)
* Spare levers (new / used)
* 4 Handlebar Tubes
* 1 set 50mm Vortex clip-on clamps (no bars)
* 2 New Yamaha OEM Engine Covers
* 1 Used Circuit 1 Engine Cover
* 1 Cam - new (not sure intake or exhaust)
--------------------------------------------------------------------------
Condition Report:
1 Bike is perfect and ready to be ridden. 1 Bike shows a check engine light, but runs and sounds fine. Chuck Giachetto worked on the bike with the 'check engine' light in the summer of 2007 and believes it to be fine. During the time which we raced the bikes, this condition also existed.
--------------------------------------------------------------------------
Pricing:
Bikes + Spares and Extras: $11k
Bikes + Spares and Extras + Kenworth Race Transporter: $25K
See Truck Here:
http://www.kneedraggers.com/pages/info/forsale/index.html
Kenworth Only: $17.5K
Contact via Email or Phone:
sales@kneedraggers.com
(302) 328-5562
(877) 294-2920
Ask about the race team equipment for sale.
These bikes were ridden by Matt Wait to a championship in the Formula USA series in 2003, and also competed at many AMA events. These bikes set many lap records in 2003, and held them for years to come. These bikes were given to us by Yamaha, have the original Certificates of Origin, and have never been titled. The bikes are in clean condition.
The bikes and spares included can be viewed at the following link:
http://www.kneedraggers.com/r6parts/
The specs and features are as follows:
Two 2003 Yamaha R6 Motorcycles
-120HP SuperSport Motors Built and Maintained by Fat Chuck (Chuck Giachetto)
-Power Commanders
-Ti-Force Full Ti Exhaust (one bike has a stainless steel midpipe, and a brand new, never been used Ti canister)
-Shark Skinz Bodywork (mint condition set on each bike, as well as spares shown in photos. one bike shown without bodywork for illustration purposes only)
-Graves Rearsets
-Penske Triple Adjuster Rear shocks, with custom built reservoir, and Titanium Springs
-Front Forks have 25mm Cartridge Kits from Traxxion (a custom setup for that year using Kawi cartridges)
-Graves Clip On's
-CRG Adjustable Brake Lever on One Bike
-One Bike has Brembo billet Calipers w/ Brembo Master Cylinder / Remote Adjuster
-Galfer Superbike Style Brake Lines
-Ohlins Top Mount Steering Dampers
-Vortex Frame Sliders
-Graves / Woodcraft Engine Covers
-Vortex 520 Sprockets
-DID 520 ERV Chain
-Woodcraft Front and Rear Stands Included for each bike (2 sets of stands)
--------------------------------------------------------------------------
Spares and Extra Equipment Also Included:
(see photos at above URL -- everything pictured in the photos is included, EXCEPT the work table, and the generator):
* Ohlins Road and Track Forks - Recently rebuilt by Thermosman. These forks were sold as R1 Road and Track forks, which we then mounted to the R6 using a custom Attack Triple Clamp.
* Attack Performance Custom Triple Clamp (no extra offsets included)
* Brembo offset brake caliper re locators to use Brembo calipers on the R&T forks
* R1 Front Wheel w/ oversized Brembo 320 floating rotors for use on R&T forks (not shown in pictures)
* 2 Extra Shark Skinz Uppers and Lowers in decent shape
* Rotors - 4 or 5 SETS including wave rotors, brembo rotors, and galfer rotors. Most in excellent condition with little use, just need to be scotchbrited / cleaned up.
* 2 Rear Tire Baker Tire Warmers and 1 Front Tire Warmer
* Digital Control Box for Tire Warmer Temperature
* 3 Sets of Different Rearsets with spares
* Brand New set of Ti-Force stainless exhaust headers
* More OEM spares than I can list here -- see the photos to get an idea. Seems like just about every engine part imaginable, except for pistons.
* 3 additional random bike stands
* Spare Airbox (new)
* 3 Scotts Oil Filters
* Spare stock brake calipers w/ stock lines (used)
* 2 Stock Fairing Brackets
* Spare Vortex Fairing Bracket (new)
* Spare plastic side covers (new, qty 3)
* Spare clutch basket (new?)
* Spare stock undertail (new)
* Spare Radiator (used)
* Spare levers (new / used)
* 4 Handlebar Tubes
* 1 set 50mm Vortex clip-on clamps (no bars)
* 2 New Yamaha OEM Engine Covers
* 1 Used Circuit 1 Engine Cover
* 1 Cam - new (not sure intake or exhaust)
--------------------------------------------------------------------------
Condition Report:
1 Bike is perfect and ready to be ridden. 1 Bike shows a check engine light, but runs and sounds fine. Chuck Giachetto worked on the bike with the 'check engine' light in the summer of 2007 and believes it to be fine. During the time which we raced the bikes, this condition also existed.
--------------------------------------------------------------------------
Pricing:
Bikes + Spares and Extras: $11k
Bikes + Spares and Extras + Kenworth Race Transporter: $25K
See Truck Here:
http://www.kneedraggers.com/pages/info/forsale/index.html
Kenworth Only: $17.5K
Contact via Email or Phone:
sales@kneedraggers.com
(302) 328-5562
(877) 294-2920
Ask about the race team equipment for sale.